Centered Rivet Attaching Machine
The SBTP-200G Centered Rivet Attaching Machine is capable of automatically attaching centered rivets. In addition, rivets of different sizes and types can be attached by replacing components such as dies, jaws, channels, etc. On the nail side, both capped and uncapped nails can be attached as standard. Our SBTP-200G machine features easy operation, a simple product changeover system, adjustability for every product, and advanced technological equipment that delivers high performance regardless of material type. With a waste rate of 1–2%, it can process approximately 3,500 pairs of trousers in 8 hours.
SBTP-200G
Raised-Center Rivet Attaching Machine
The SBTP-200G Raised-Center Rivet Attaching Machine is capable of automatically attaching raised-center rivets. In addition, by changing components such as the die, jaw, channel, etc., rivets of different sizes and types can also be attached. On the tack side, both capped and uncapped tacks can be attached as standard. Our SBTP-200G machine features easy operation, a simple product changeover system, adjustability for different products, and technological equipment that enables high-performance operation regardless of material type. With a waste rate of approximately 1-2%, it can process approximately 3,500 pairs of trousers in 8 hours.
Raised-Center Rivet Attaching Machine Technical Specifications
| Main Motor Type | AC Motor 1400 rpm (Alternating Current) |
| Electrical Power (W) | 370W = 0.37kW |
| Voltage (V) | 380V |
| Frequency (Hz) | 50/60 Hz |
| Pressing Force F | 450kgF = 4415N |
| Hopper-Bowl Motor Type | 24V DC Motor 15W 1.60Nm 100rpm |
| DC Motor Speed Control Type | Electronic Control with Potentiometer |
| 1/7 Reduction Gearbox | Size 50 Body, Ø14mm Shaft Output |
| Electromagnetic Brake | 24V DC Standard Operating Voltage |
| Electronic Control Board | Programmable Electronic Control Board |
| Digital Counter | Resettable Press Counter |
| Emergency Stop Button | Manufactured in Compliance with CE Standards |
| Full-Cycle Sensor | Sends a stop command to the brake after each press |
| Cam Position Sensor | System that prevents repeated pressing when material is jammed or defective material is detected |
| Magnetic Sensor | Monitors the position of the hand safety guard. The mechanical hand guard has an opening and closing system. When opened, the system is disabled and the machine will not operate |
| Laser Marker | Enables precise pressing at the desired position |
| Pressing Capacity | 200 presses / minute |
| Working Position Height | 910mm (± 20mm adjustable) |
| Throat Depth | 91.5mm (from the pressing center to the rear) |
| Operating Temperature | Optimum 25°C, max. 40°C |
| Noise Level | 80 dB (A) |
| Press Adjustment | Impact adjustment according to fabric thickness |
| Product Height (mm) | 1400mm – With Wooden Crate (1500mm) |
| Product Width (mm) | 474mm – With Wooden Crate (520mm) |
| Product Depth (mm) | 517mm – With Wooden Crate (560mm) |
| Net Weight (Kg) | 105 kg – Gross Weight with Wooden Crate (130 kg) |
Automatic Accessory Attaching Machines Other Products
